Energy saved is FREE ENERGY

Add a Comment

Comment by Kat on February 23, 2009 at 5:38am

TODAY...The nation's most important leaders in energy reform are gathering with T. Boone Pickens at the National Clean Energy Project Summit to tackle the critical issues of ushering in a new era of renewable energy and ending our dependence on foreign oil. This event will feature a lot of people who know what they are talking about when it comes to energy policy - including John Podesta from the Center for American Progress Action Fund, U.S. Senator Harry Reid, President Bill Clinton, Vice President Al Gore, Secretary of Energy Steven Chu, Secretary of Interior Ken Salazar, Speaker of the House Nancy Pelosi, Climate Czar Carol Browner, Owens-Corning CEO Michael Thaman, American Electric Power President & CEO Mike Morris, Sierra Club Executive Director Carl Pope, American Wind Energy Association CEO Denise Bode, Riverkeeper Alliance Chief Prosecuting Attorney Robert Kennedy, Jr. and many others.

Watch the live roundtable discussion on Monday, Feb. 23, at 10:15 a.m. ES

Comment by Kat on December 30, 2008 at 4:21am

Please go to http://change.gov/openforquestions sign-in or sign-up for an account at Change.gov and ask the administration what they plan to do with regard to energy independence and the Pickens Plan.

Comment by Jeri Francis on November 17, 2008 at 9:32pm

Hey Guys...just follow the link and you can vote for T. Boone as the person of the year...right now he is number seven...vote now and push him up the list!!

T. Boone for Time Magazine's Person of the Year 2008! Click on the link and rate Boone a '10' to give him your support: http://www.time.com/time/specials/packages/article/0,28804,1857576_1857573_1857557,00.html

Comment by Jeri Francis on September 21, 2008 at 2:04pm

Here is something we all can take a moment to do:

http://www.greenjobsnow.com/hq/ready-petition

Comment by Steaphany Waelder on September 17, 2008 at 7:23am

I this may be of interest for anyone who lives in an area where coal is available for home heating.

Automation Correct has brought 21st technology to coal fueled home heating. They sell a control system which optimizes coal fuel consumption and regulates room temperature, saving fuel, money, and improving comfort. The system can even start a coal fire automatically when the temperature drops.

Check out their web site:

Automation Correct

Comment by John R Cogar, Oregon 2nd. Congressional District Leader on September 14, 2008 at 8:52pm

Here is one of my pet peeves... Can you imagine the electricity it takes to leave the lights on in big city buildings? I know people are working on getting them turned off... but my P.O. is rural night lights.

If you drive through the country, darn near every place as at least one if not two or three "night lights" that stay on all night long.

Now I live in the country, and I realize its nice to walk out your door and see where you are going, but leaving one of those big argon gas lights burning all night is Bull.

People say it deters crime.. Bull again. It just lets the thief see where he is going if he is sneaking around.

The solution is so simple too... hook up motion sensor lights. If you walk outside the light comes on, you get in your car and leave, the light goes off. If you really want to see outside at night then hook up a solar powered flood light or two.... They will stay on while you are awake and recharge the next day.

How many Nukes or coal fired power plants could be eliminated or not built it this one simple step were taken to eliminate these unnecessary sources of pollution and waste?

John C

Comment by Anachronism on September 10, 2008 at 10:33am

The enclosed information explains a tried and true method of “Passive Solar Heating”. I first installed this EXACT system in my first 3-story Mini-Storage in 1983. I continue to “TOTALLY” heat the building using the method explained below. The building size is 95’ long X 55’ wide and 27’ tall. The total heating cost is $1.00 per day, period.
Here’s Information: SPECIFIC INSTRUCTIONS FOR BASEBOARD ELECTRIC HEATING WITH NO FURANCE UNIT or existing force air heating systems to install in your home or business with complete costs for parts located in your local Home Depot or Lowe’s.
Picture of original solar installation are shown on “Picture page” at Anachronism. Our building is the size of 10-1800 sq. ft. homes and costs $.10 per day to heat the interior volume of a1800 sq. ft. home.

Step by step instructions to create Passive Solar Heating
2008

1-When and before you enter your attic space, make sure you have proper light to observe all elements of your attic and the area where you will work.
2-You must use safe working planks to safely span the work area (Your attic is probably the structure that contains the insulation, wiring, heat ducts and other elements of the ceiling structure) so that you “DO NOT DAMAGE ANY OF YOUR FINISHED INTERIOR STRUCTURE”.
3-If you have a “Downdraft” furnace system with the return air piping going to your current heating system, you want to enter this duct air return as close to the furnace as possible.
4-The closer to the main suction point, more Passive Heat is “Pulled into” your house.
5-Start your upper suction position of the intake pipe at least 24” to 30” to draw from the “Hottest” collection point in the typical pitched roof area inside.
6-If needed, insert a short piece of metal ductwork into the new suction pipe to keep the flexible unit from sucking in and blocking the entering position in your attic.
7-Carefully attach to furnace “Suction pipe” and keep it straight and proceed to the position where you enter the “return air line”, use suitable adaptor when attaching into the furnace “return air ducting” of your existing furnace system.
8-Pick a location for your “Remote” sensor control inside your home and connect the wiring to the sensor inside your attic located at a distance of 36” to the side of your new intake pipe and level with the pipe opening located in the attic.
9-Follow instruction with the sensor and connect your wiring from the attic remote sensor to the “Sensor” unit.
10-Attach low voltage (dual wire) from the sensor to the connection block of furnace in the same positions your house or current interior thermostat is currently connected.
11-CONSULATE LOCAL ELECTRICAN IF NEEDED TO HOOK UP THESE LOW-VOLTAGE WIRES IF NECESSARY OR ANY WIRING!
12- Make sure to support the new pipe with suitable material and DON’T crush ANY of your air pipes.
13-Make sure the connection into your current intake pipe is airtight and don’t damage either piping.
14-NOW you need to close any current ATTIC venting openings in the gable ends to “CREATE YOUR PASSIVE SOLAR HEATER”. Understand that this is legal as you have now “CREATED A POSTIVE ATTIC REMOVEAL SYSTEM OF HEATED AIR”
15-Go to the, “10”, photo’s on Anachronism page and notice my designed “Intake” opening are located at the topside of the “attic ceiling structure”. This allows the “COMPLETE ATTIC AREA” serve as the solar collector unit.
16-NANCY,”ATTENTION, ELECTRICAL BASRBOARD METHOD”
Follow steps# 1,2,4,5,6,8,9,10,11,12,13,14,15,

(IF you don’t have a forced air furnace and currently use electric baseboard heaters you need to pick a location in your ceiling of the room that allows the most “equalized” location to bring your attic heat into your home or a specific room?
If needed, add a SECOND PIPE AND ANOTHER SUCTION MOTOR “OR” USE A CIRCULATION FAN FROM THE ROOM (to spread the heat) WHERE YOUR PASSIVE SYSTEM DELIVERS YOUR ATTIC HEAT INTO YOUR LIVING SPACE. (YOU WANT "VOLUME" OF AIR INTO YOUR HOME SO DO NOT USE SMALLER INTAKE PIPE.)
Understand that you can remove all the solar heat from your attic if temperature is cooler and no sun on your roof. "SUN CREATES YOUR HEAT!! "No sun/no heat!

17-Your pick of a location that equalizes the distribution within the room and, “if needed” use a metal or plastic pipe with holes around the pipe to cause the air to disperse and direct downward to the floor area. You figure out this problem to fit your house. (You can simply direct airflow to floor, you decide)
18. Use the defined “Inline Suction Motor” and consult your local electrician to make the electrical connections to this motor and use a suitable electrical switch to the “Remote Sensor” to make automatic or simply use a wall switch to operate this “Inline Suction Motor” by hand.
“You decide whether you want automatic or manual control of the passive Solar Heating system?”
19-Trim out the inside “exhaust opening” to a neat and clean appearance to finish the job.
20-You have created “YOUR OWN” Passive Solar Heating System!

Remember you “MUST” have outside air movement into the attic space from either the eaves or at the bottom of the gable ends or the vents under the eaves to allow “OUTSIDE” air to enter the attic space to allow your system to function
(NOTICE the specific location on each of my project’s “Attic Air intakes” as I designed, built and controlled every aspect to create workable Passive solar projects.)
(Side note, in 1984 a Professional Heating Engineer indicated my project could not produce a “dimes” worth of heat!)
I should have listened to the professional?

Comment by Anachronism on September 10, 2008 at 9:57am

Posted to FREE ENERGY, 9/10/08 Anachronism.
Enclosed is my practiced method to decrease refined oil use and put the savings directly in our pockets.
This “Simple Process starts during your next visit to your friendly TLE, Jiffy Lube, Oil Can Henry’s or any other location you typically use when changing your oil every 3,000 miles.
Step 1. YOU simply request or purchase your MOBIL 1 Full Synthetic, MOBIL 1/EXTENDED PERFORMANCE MOTOR OIL readily available in either 10W-30 or 10W-5.
These SYNTHETIC OIL weight’s covers 95% of all engines CURRENTLY used IN ALL VEHICLES. (Currently available for $29.88 w/tax) at your local Wal Mart store)
Step 2. Bring your new Mobil Extended Performance High Efficiency and High Capacity Oil Filter (costs $11.25 w/tax). (Available at all SCHUCK’S, NAPA, NATIONAL, CARQUEST or other national auto suppliers.) This filter MUST BE USED to ensure the Oil Filter continues to function for the required miles and maintains the “MOBIL 1, Guarantee of 15,000” miles of protection.
Step 3. YOU have taken your next STEP to help everybody save 40,000,000 million gallons of refined OIL in the next 12 months.
Step 4. This Simple Process directly saves you $118.44 every year and you only visit your Friendly Oil Changer every 15,000 miles.
Step 5. When this Simple Process is started, the owners of ALL participating vehicles are jointly involved in reducing $500,000,000 of our money leaving our county every Year!
Currently you pay, Wal Mart, ($31.65 w/tax) and ($3.00) for one trip to Wal Mart, to change your imported oil at or any other business. (Quoted-8/30/08) Every 3000 thousand miles, you typically spend $158.25 per year for five oil change’s every 15,000 miles of travel.
NOW you only spend ($73.37 for every 15,000 miles) instead of $158.25 every 15,000 miles. You save $84.90 per year and five hours wasted in the “Waiting in oil line”.
Approximately, 60,450,300 oil changes occurred at Wal Mart last year and will collectively save all OIL CHANGERS owners $15,112,825.
These MILLIONS OF DOLLARS stay in your wallet, “NOT THE OIL CHANGING COMPANIES.
The 5 or more quarts of oil used in these car or trucks equals “302,256,550” quarts of oil WASTED.
Most HD trucks require 15 quarts of oil. All vehicles built in the last 8 years explain in the owner’s manual about using “Full Synthetic oil, in place of typical motor oil.
IF NEEDING TO COMFIRM, SIMPLY ASK THE DEALER OR LOOK IN YOUR OWNERS MANUEL
EACH OF US undertakes ONE simple act using Mobil 1,Full Synthetic Mobil 1, and America can END the importing of 75,564,125 MILLION gallons of Oil and KEEP $15,112,825 MILLION dollars in OUR individual wallets.
NO subservient actions to any government or COUNTRY! YOUR Actions define your BACKBONE.
I ALREADY PRACTICE WHAT I PREACH. YES, every time you change oil and use the method explained above YOU will decrease the WASTE of OIL per car, by 4 gallon’s or more, PER YEAR! Anachronism
IF YOUR CAR USES EXCESSIVE OIL, CHECK OIL LEVEL EVERY 1,000-MILES AND “TOP OFF” AS NEEDED TO PROTECT YOUR ENGINE!

Comment by Jeri Francis on September 7, 2008 at 7:18pm

Awesome product, must see:

http://cc.pubco.net/www.valcent.net/i/misc/Vertigro/index.html

Comment by Paul on September 6, 2008 at 2:15pm

Please Google Tom Delor and see who Tamas really is.

• First
• Previous
• Next
• Last