PPPOU

Comment

Comment by DANIEL B FROMHOFF on March 6, 2009 at 1:12pm

WHY WE INCLUDE A POWER SAVE IN EACH HYBRID SYSTEM.FOR $300

SAVE UP TO 25% ON YOUR MONTHLY ELECTRIC BILLS!
The Power-Save 1200™ for Residential Applications.

The Power-Save 1200™ is a small gray box that fits neatly next to your breaker panel, saves you money year after year and protects the entire home.

The Power-Save 1200™ was designed with the homeowner in mind, providing lower energy bills, increased motor and appliance life, for all of the equipment inside of your house.

Residential customers throughout North America could see a realized savings typically and as much as 25% on their electrical usage (and thus power bills). The Power-Save 1200™ is UL Certified as the Cat. No. ABET 2201 and CSA certified.

Money isn't all that you are saving when you use Power-Save Energy Corp. products. It's an energy-wise purchasing decision with many positive environmental implications. Power Suppliers also benefit by being able to supply power to more customers without the generation or acquisition of additional power.

I have a Power-Save 3400 commercial / industrial unit installed in my 28,000 square foot, 4-story office building. The building is home to a number of different professional offices including attorneys, engineers and the United States military. I am seeing an average savings of at least 28% per month and I am very happy with the product. Extremely happy actually. As an example, prior to the installation of the Power-Save , my April 2006 electric bill was just over $2700.00. I just received my April 2007 bill in the amount of $1780.00. The product will literally pay for itself in only a few months." - Mo Sandiq, Owner of Northwest Investment Properties LLC, Woodland, California
________________________________________
"I bought a Power-Save 1200 two months ago (January) and installed it on my home. It has obviously slowed down our E-meter/hour and we are saving money. We love it! We are also very interested in selling your product in our area." - Cindy Morrice, West Sacramento, CA
________________________________________
"I must admit, I was a bit skeptical about your product, as an electrical engineer friend introduced me to Power-Save a few months ago...

While I was testing the unit, I had my friends present. I tested the product on the load side, and I found no difference in the amperage draw to my A/C unit on the circuit conductors directly from the breaker to it. At first, I was disgruntled. After settling down and thinking about what I had just done, I realized my error and clamped my Fluke meter on the mains directly behind the meter registering current draw at the line side of the load center....and BINGO!!!!
On start up, the A/C unit went up to 91 amps and leveled out at 13 without the Power-Save 1200 on. When the Power Save unit was engaged it was a draw of 35 amps and leveled out at 8.75. That pretty much blew everyone

away! After that, I tested everything with a motor load in my house. I was astonished at the significant reduction in amperage.
I have had, in addition, a lot of customers complaining of bad power spikes, sags, and all kinds of irregularities from their utilities which could benefit from the unit." - John Turteltaub, Golden Eagle Electrical, San Diego, CA
________________________________________
"I purchased a PS 1200 in early June (2006) and installed it as soon as it arrived on June 10th, 2006. As you know, the electric rates in Maryland have gone up significantly since July 1st . I recently received my electric bill and compared it to my bill from June/July of 2005. I discovered a savings of 827 kwh, a 24.45% decrease over the same time period last year. This unit is wonderful; only wish I knew about it earlier...Thanks again!!" - Forrest Silver, Ellicott City, Maryland
________________________________________
"On March 24th, 2006 I had a Power Save 1200 installed on my circuit panel in my Baltimore Maryland home. My home is about 2200 Square feet and is a townhouse. My February/March utility bill used 1542 Kwh. My March/April bill had 1272 Kwh usage, and although I only had the Power Save 1200 on my circuit panel for 19 days in the March/April billing period, I used 270 less Kwh that month.

Then, the next billing period really told the tale. The April/May bill only had 1002 Kwh usage, and I ran the A/C a couple of days that reached the 80's outside. So even with the same operation going on in our house, using everything the same, I estimated that I am averaging about 400 less Kwh a month because of the Power Save 1200...

In July our electric rates are going to 11.871 cents per Kwh so I estimate that I'm saving about $47.00 a month, which pays for the Power Save in about 7.9 months. It made a believer out of me, and it can do the same for everyone. I am in the energy business, and I have seen prices rise 600% for natural gas in the past 9 years. This product is a real winner. Order one today, and stop paying for wasted power." - Bob Kleebauer
________________________________________
"Just a quick note to let you know how shocked I was to find that your Power Save 1200, is everything you said it was and more. I had the unit installed on a disconnect switch so I could check the actual power usage with and without the Power Save 1200 in service. I am cooling 2800 sq. ft. with seven tons of A/C Heat Pump equipment. We observed an immediate drop of 6 amps. under an approximant 50% load. This represents a 16% savings. Extrapolation tells me if I use this equipment 60% of the time, I will save $42.00 each month. Which gives me a payout in 7.5 months and then pure savings? Please keep in mind that this is the savings attributed to the Heat and Cooling under Aprox. 50% loaded equipment only. As the summer wears on and the load to increase, I expect the savings to grow. Please keep me informed of any further improvement or additional equipment that addresses the power reduction solutions." - C.A.H. Austin, Arkansas
________________________________________
"I am achieving well over the projected savings of 25% and I am confident this will continue into the future...if every household in America had a Power-Save 1200 installed ...there would be enough electrical energy saved to eliminate any shortage for the next 5 years." - Robert Milligan Jr., Bluffton, SC.
________________________________________
"My first month savings was as an astounding 18%! I just had to write you..." - Lucinda Johnson, Arroyo Grande, CA




________________________________________
"I installed my Power-Save 1200 in March 2006, and my savings were immediate. My first full month of usage, year over year savings were fantastic. I went from an average daily usage of 80 kWh to 55 kWh, and my bill went from $172.80 to $117.32! With this savings my Power-Save 1200 will pay for itself in 6 months." - Stanley Weston, Fox Island, WA
________________________________________
"I just got my first electric bill with the Power-Save installed and I used 7.5 kilowatts less this month than the same month last year. Works out to about $300 per year. Thanks and have a great day." - Ron Piechowski Owner Horizon Electric, Inc. Bear, Delaware
________________________________________
"My first bill with Power Save installed for a full month shows $104 in savings!, 790 less Kwh compared to last year!" - Frank Luber
________________________________________
"My Power Saver was installed on 8/4/06. I get an electric bill with a meter reading every two months, the first of which after the PS installation was on 9/20. It showed 456 KWH for 30 days, average daily cost (adc) $1.18 compared to 577 for 32 days, adc $1.31 in the same period, 2005. The next reading was on 11/21 and showed 246 KWH for 33 days, adc $0.65 compared to 463 for 30 days, adc $1.16 in the same period, 2005. My most recent meter reading was on 1/22/07 showing 284 KWH for 33 days, adc $0.73 compared to 805 for 35 days, adc $1.64 for the same period in 2006. The average monthly usage on my July, 2006 bill was 518 KWH compared to 457 KWH in the Jan. ’07 bill. The Power Saver is living up to its advertising." - Richard McGann


BECAUSE IT WORKS.

WOULD YOU REALLY WANT A SYSTEM WITHOUT ONE? DOESN’T IT MAKE SENSE TO ELIMINATE 25% OF YOUR POWER DEMAND BEFORE WE BUILT YOUR SOLAR (PV) SYSTEM?
ALSO WE WILL ADD SOLAR (THERMAL), WHICH HAS A LOWER NET $/WATT AND A SHORTER PAY BACK, BEFORE WE BUILD SOLAR (PV).
OUR OBJECTIVE IS TO GIVE YOU THE LEAST SOLAR PV POWER TO DO THE JOB AND THE MOST “BANG FOR THE BUCK.”

DANIEL FROMHOFF
TOUCANDAN@COMCAST.NET

Comment by DANIEL B FROMHOFF on December 8, 2008 at 11:40am

WE NEED PP MEMBERS TO TAKE THEIR COMMENTS SERIOUSLY AN BECOME MEMBERS OF PPPOU BY JUST ADDING AN ENERGY REDUCTION DEVICE TO THEIR HOME OR OFFICE BUILDING. IT IS A SIMPLE AND INEXPENSIVE ACTION TO LOWER YOUR POWER BILL BY 25% EVEN 50%. THIS WILL HAVE A MAJOR IMPACT ON REDUCING CARBON FOOTPRINTS.

Comment by Michael on December 5, 2008 at 11:36pm

Hello Daniel
Thanks for your good work.
I would like to invite the members of your group to join the group Wanted Patents, New products and stay informed in all the new developments in Green Energy.
Hope to see you all there. Let's all work together on PickensPlan.
Michael
coordinator@wantedpatents.com
http://push.pickensplan.com/group/wantedpatentsprototypesnewproductsinventions/a>