Jeff Smoley's Friends

View All

Jeff Smoley's Groups

Wanted Scientists, Energy experts, Inventors, Great Minds, Innovators

View All

Jeff Smoley's discussions

Jeff Smoley's Page

Profile Information

Are you interested in becoming an organizer in your area?: Maybe--But Not Sure What to Organize

Tell us about your experience with alternative energy:: I am inventor and have had a few ideas to better use alternative energy. I have a simple to make home solar water heater for warmer climates;
Trombe wall systems, Solar/Photovoltaic combinations; in ground. inexpensive solar pool heaters; the next generation hybrid vehicles.

What excites you about this campaign?: Wind is a good long term solution, especially if it can be more widely distributed. CNG, I'm not so sure of, propane seems to be a better fuel.

What do you want to do to help?: Anyone need somebody who can think out of the box? My job was off shored two years ago.

Comment Wall (10 comments)

You need to be a member of PickensPlan to add comments!

Join this network

At 2:23pm on September 12th, 2008, Dr, Randall S. Currie said…: am helping Ken get the word out to the folks on his list.

Have you seen T. boones AUTO MATIC system to send
e-mail to your rep. You type in a few key strokes and
it auto adresses the e-mail to all your reps and the GOV.
of your state based on zip code. Has a sugested draft of a letter to send. NEVER EASYER. Spread the word to click on the ACTION CENTER at the main web site.

At 10:30pm on August 24th, 2008, Pat Jack said…: Hey Jeff,

Lots of new and interesting members joining, I'm sure they would like to hear from you in the discussions and forums. I always enjoy your analysis.

At 4:01pm on August 9th, 2008, Robert Wagner said…: an alternative is to build an adiabatic diesel using high temperature solid lubricants. I did my masters work at NASA in Cleveland and we had a contract with Cummins diesel to desing such an engine. It ran at high temperatures (that actual number i forget) to get the Carnot effiency up. It also had no need for oil or a radiator which combined take about 30% of the effiency out of the engine. This was in 1983 and i thought by now we would have these on the road. The estimated mpg was 90 for a 3000 lb car which at the time was like a Nova (gee that dates me, huh). Anyway a simpler engine with fewer parts.
Rob

At 10:19pm on August 2nd, 2008, Dale Galliart said…: You might contact Bruce Boardman at the Deere & Co Technical Center. Sorry, I don't have his phone number since they changed buildings several years ago.

Dale Galliart

At 9:38am on July 28th, 2008, James Tracy said…: Heya, what are you skill sets, what areas have you researched.
Look at what I am working on, let me know what you think. see my profile.

At 12:52pm on July 26th, 2008, Luis Garcia said…: Thanks for adding me as your friend Jeff!

It seems like everyone is getting their feet wet with their new website.. I’m excited about the member count because I know from experience that together we will have a strong voice. In the future my hopes will be to create groups and discussions but more importantly to mobilize our members. Just let me know if you have any ideas or new information. I’m here to help you and everyone else.

At 1:29pm on July 25th, 2008, Kurt Stiffel said…: yes, i have been hunting high and low for used fleet vehicles, i found a site in Az. i'll repost the link when i find it again, few cars on ebay - type in ebay cng cars... I'll keep digging and let you know what else I find, Peace and power to the sheeples. Kurt

At 5:23am on July 25th, 2008, Jeff Smoley said…: Take a look at this:
http://www.popularmechanics.com/automotive/new_cars/4251491.html?series=19

Someone has been thinking.

At 10:17am on July 18th, 2008, Jeff Smoley said…: Many years ago, I had a need to generate some hot water in a rural area of NE PA. I started with a 4' X 8' sheet of plywood. I then took 2" X 4" and built a frame. I put a thin layer of foam insulation on the plywood, then put a copper sheeting layer on the insulation. I took copper pipe and s-curved it (3" radius) back and forth from the top to the bottom. I soldered it to the copper base. I painted all the copper with a dull black paint. I think I used radiator paint. Then I covered the top with clear plastic sheeting (acrylic). Water came in the top (4' side) snaked down to the bottom and on a sunny day, got quite warm. I later built another one and put them in series so the water was warm enough to take a shower. An upgrade would be to put a second piece of plastic or other sheeting with an air gap for more insulation and less heat loss.
Another system I though up was installed by a friend. He was replacing the patio around his pool. We took the water that would enter the pool from the filter, hooked up a splitter, and one end went to the regular inlet. The other end went to a plenum pipe that had four sections of hose attached. These hoses were put in the form for the concrete patio, over the reinforcing wire and lead back to another plenum, then to the splitter. When the sun was out, and the concrete would normally get so hot you could barely walk on it, the water from the pool was run through the pipes, cooling the patio and heating the pool. Today you could probable have a computer controlled system to regulate electronic valves.